Item	Technical index	Result
Appearance	smooth paste without bubble and congealing	smooth paste without bubble and congealing
Density(g/cm³)	Specified value±0. 1 (1.45±0. 1)	1.47
Sagging degree(mm)	≤3	0
Surface Drying Time(h)	≤3	0.7
Extrudability(s)	≥150	485
Elastic recovery rate%	≥80	87
Tensile Strength/mpa (23℃)	>0.4	0.9
Cohesiveness at specific elongation after flooding	No damage	No damage
Cohesiveness after Cold-drawing and hot-pressing	No damage	No damage
Cohesiveness after flooding and lighting	No damage	No damage
Mass loss rate(%)	≤8	2
Alkane plasticizer	Negative	No detectable
Note:The result is affected by the actual environment and has some deviation.

Structural Silicone Sealant

Structural silicone sealant is mainly used in the joint sealing of buildings.

Structural silicone sealant has good elasticity, good resistance to high temperature and also good flexibility at low

temperature.

Structural silicone sealant is suitable for all kinds of curtain wall weather sealing.

Usage Methods:

Preparation Work:Ensure the construction surface is clean, dry, free of dust, grease and moisture. Clean it with a cleaner

and a rag. Install the glass glue gun in advance.
Gluing Steps:

Use a utility knife or scissors to cut the bottle mouth of the glass glue. Pay attention to make the incision of an

appropriate size to ensure smooth glue extrusion.

Load the glass glue bottle into the glue gun and ensure a firm installation.

Hold the glue gun, align the glue nozzle with the construction area, and press the trigger of the glue gun at a constant

speed to extrude the glass glue evenly.
Construction Skills:

Keep the glue nozzle at a 45-degree angle to the construction surface when applying the glue, so that the glue can be

distributed more evenly on the construction surface.

For longer construction joints, apply the glue in sections. After each section, use your fingers or tools to compact and

smooth the glue.
Post-treatment:

After applying the glue, promptly clean the excess glass glue with a damp cloth or scraper to avoid difficulty in

cleaning after curing.

Factory pictures

FAQ

Q1. When can I receive my products?
A1: Sample order need 1 - 3 days.
Mass production need 7- 10 workdays.

Q2. Can you send me samples for reference?

A2: Yes, we are glad to send you free samples.

Q3. Can you provide OEM service?

A3: Yes, and we can custom the volume and tube package.

Q4: Where is your factory? Can I visit it?
A4:Our factory locate in Guangdong Province, welcome to visit us anytime!

WhatsApp	+86 13302391599
Email:	mangrove88@126.com

Inquiry Cart 0